Bosch Rexroth IndraControl VDP 08.3 Manual page 36

34/81 Bosch Rexroth AG
Dimensions, Installation and Wiring
Openings for cable grommets
Fig.5-11: Dismounting the cover
Using the cable grommet
● Select the corresponding cable grommet from the table, see
diameter and corresponding cable grommet" on page
● The cable grommets and the connector for connecting the keypad are in
the delivered accessories kit.
● Lay the cable grommet around the cable, see
grommet around the cable" on page
cable
Fig.5-12: Laying the cable grommet around the cable
● Plug the cable grommet into the housing, see
grommet into the housing" on page
Fig.5-13: Plugging the cable grommet into the housing
● The cables, which are lead through a cable grommet, are to be provided
with a strain relief, see
page 35.
DOK-SUPPL*-VDP*08.3***-PR02-EN-P
Rexroth IndraControl VDP 08.3/40.3 Operator Terminal
fig. 5-12 "Laying the cable
34.
Select cable grommet
according to the table
fig. 5-13 "Plugging the cable
34.
housing
cable grommet
flat surface
fig. 5-14 "Strain relief realized by a cable wrap" on
fig. 5-9 "Cable
32.