Xusb Interfaces - Bosch Rexroth IndraControl VDP 08.3 Manual

48/81 Bosch Rexroth AG
Interfaces
USB connection
type B
+
230 V ~
24 V
–
24 V
External
power supply unit
230 V → 24 V
7.2.5

XUSB Interfaces

Operating the USB connections on
the VDP 16.3/40.3 in the USB2.0
USB cable
USB connection
type A
XUSB1..6
+
24 V
– 3
In
XVID
–
2
XSER
+ +
1
Out –
X10
UPS
control cabinet PC
① See
control cabinet PC and VDP max. 5 m".
Fig.7-5: Voltage supply and optional USB2.0 port
The devices are provided with four USB interfaces on the connector panel
(XUSB1/2 and XUSB3/4) and - depending on the variant - one USB interface
on the front panel.
NOTICE
The maximum power consumption of one USB connector must not exceed 500
mA. The total current of all USB female connectors must not exceed 1 A.
Fig.7-6: USB interfaces XUSB1/2 and XUSB3/4
The USB connections on the VDP 08.3/40.3 only support USB1.1 because the
data is transferred to the control cabinet PC by using the XSER interface. The
mode
XUSB1 to XUSB6 connection on the control cabinet PC support USB2.0. If
USB2.0 is also required on the VDP 08.3/40.3, it can be implemented by con‐
necting the XUSBIN connection to the VDP 08.3/40.3 to one USB connection
(XUSB1 up to XUSB6) of the control cabinet PC by using an USB cable (see
fig. 7-5 "Voltage supply and optional USB2.0 port" on page
can be ordered as accessory, see
Interface" on page
DOK-SUPPL*-VDP*08.3***-PR02-EN-P
Rexroth IndraControl VDP 08.3/40.3 Operator Terminal
1
for USB2.0
XUSBIN
XVID
XSER
X1S1/2 (0 V)
X1S1/1 (24 VDC)
operator display
chapter "Operation Modes" on page 46
Switching off of the VDP power supply unit if
the total current of all USB female connectors
exceeds 1 A.
chapter 12.2.5 "Connecting Cable for USB
74.
XUSB1...4
Front USB connection
(as option)
VDP xx.3
section "Distance between
48). The USB cable