Day & Night - Interlogix TruVision TVB-2403 Configuration Manual

MANUAL
ATW
AWC→SET
Day & Night
Select Color, B/W, EXT and AUTO to switch between day and night mode.
Note: AUTO mode of the TVB-X406 camera is the similar to EXT mode of the
other cameras (TVC-2401/4401, TVX-2403/4403, TVB-X404/X405, and TVD-
X404/X405). You can enable/disable IR in EXT mode or TRIGGER mode. The
TVC-X401 camera supports both EXT and AUTO mode; configure the mode in
AUTO mode.
AUTO
COLOR
B/W
12
Adjust the white balance by customizing the Blue and Red value,
which range from 1 to 100.
MANUAL WB
BLUE
RED
RETURN RET
Select ATW for the white balance to be automatically adjusted
according to the scene illumination.
If enabled, this function will only adjust the WB once. It is best used
in a stable environment.
The image switches from color to B/W or from B/W to color
automatically. The switching threshold value is adjustable.
AUTO mode is supported by the TVC-2401/4401 and TVB-
2406/4406 cameras.
1. DELAY
2. D->N(AGC)
3. N->D(AGC)
4. RETURN
DELAY: Select the delay before camera switches between Day/Night
mode when the light condition reaches configured threshold. This
function can effectively prevent Day/Night switches caused by
occasional illumination changes.
D->N (AGC): Define the Day/Night switch threshold value from
between 0 and 100.
N->D (AGC): Define the Night/ Day switch threshold value from
between 0 and 100.
The image is in continuous color day mode.
The image is in continuous black and white night mode. The IR LED
turns on when the lighting conditions are poor.
---|------ 51
---|------ 50
AUTO
-------|--8 0
-------|--8 0
-------|--8 0
RET
TruVision HD-TVI 1080P Camera Configuration Manual