Exposure - Interlogix TruVision TVB-2403 Configuration Manual

Hd-tvi 1080p camera
Hide thumbs Also See for TruVision TVB-2403:
Table of Contents

Advertisement

ZOOM SPEED
PRESET
FOCUS MODE
LENSINIT
AFLIMIT
ZOOM VIEW

Exposure

Select as exposure mode MANUAL or IRIS-PRI (Iris Priority). This function is
only available for the TVB-2406/4406 camera.
Only the TVB-2406/4406 camera supports the lens auto-focus function.
Note: When
Manual
IRIS-PRI
is selected, SHUTTER and AGC settings are disabled.
Select the following options under the Exposure menu:
SHUTTER
AGC
SENS-UP
BRIGHTNESS
TruVision HD-TVI 1080P Camera Configuration Manual
Move the cursor left/right to adjust the zoom speed.
Set the lens pre-set, delete or call pre-configured lens preset. A total
of 64 presets can be set.
Select Manual, Auto, or Trigger mode.
Auto mode: The camera focuses automatically.
Manual mode: Click Zoom+ and Zoom- to focus.
Trigger mode: The image will not refocus if it is changed.
Lens initialization. Reset the lens to calibrate it.
Auto Focus Limit. Select the minimum auto focus distance: 20 m,
10 m, 6 m, 3 m, 1.5 m, 1 m, 30 cm, or 10 cm.
Display the zoom factor on the OSD.
is selected, the SENS-UP settings are disabled. When
EXPOSURE
1. SHUTTER
2. AGC
3. SENS-UP
4. BRIGHTNESS
5. D-WDR
6. DEFOG
7. RETURN
Set the shutter speed. The options available to select are:
1/30, 1/60, 1/90, 1/100, 1/125, 1/180, 1/195, 1/215, 1/230, 1/250,
1/350, 1/500, 1/725, 1/1000, 1/1500, 1/2000, 1/3000, 1/4000, 1/6000,
1/10000, 1/20000, or 1/30000.
For other cameras, the options available to select are: AUTO,
1/25(1/30), 1/50(1/60), FLK, 1/200(1/240), 1/400(1/480), 1/1000,
1/2000, 1/5000, 1/10000 or 1/50000.
Automatic Gain Control.
Automatically adjust the image quality in low light conditions. Value
range is from 1 to 15. Select a higher value in low light conditions.
Select OFF/AUTO to disable/enable the camera to increase exposure
times on a signal frame in low light conditions.
Note: SENS-UP is selectable only when Shutter is set to AUTO or
1/30.
Select a value to increase the image brightness. Value range is 1 to
100. The higher the value, the brighter the image.
Note: This function is disabled if D-WDR is enabled.
AUTO
OFF
---
---|------ 40
OFF
OFF
RET
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents