Table of Contents
Advertisement
GAIN
FLICKER MODE
WB (White Balance)
White balance (WB) tells the camera what the color white looks like. Based
on this information, the camera will then continue to display all colors correctly
even when the color temperature of the scene changes such as from daylight
to fluorescent lighting, for example.
Set the WB mode to
ATW
MWB
DAY/NIGHT
This function defines whether the camera is in day or night mode. The day
(color) option should be used, for example, if the camera is located indoors
where light levels are always good.
Set the DAY/NIGHT mode as Color, B/W, or SMART.
COLOR
B/W
TruVision HD-TVI 3MPX Camera Configuration Manual
balances the brightness level of the whole image.
This optimizes the clarity of image under poor lighting conditions. Set
the gain as HIGH, MIDDLE, or LOW. The higher the gain value, the
clearer the image. Select
Note: The noise will be amplified if the gain is enabled.
This is an anti-flicker function that is used when the camera is close
to a light source.
There are two modes that can be selected:
MODE1: It is used in a normal situation that is set to default.
MODE2: It is used when the camera is close to a light source.
Note: This function is only available for motorized VF lens cameras
(TVB-2408/4408 and TVT-2402/4402).
ATW
or MWB.
Use ATW (automatic tracing white balance) to automatically adjust
the WB in real time as the lighting conditions change.
Manually adjust the color temperature to meet your own requirements
by modifying the blue and red gain parameters. Only use this function
when there is steady light.
Set the
R GAIN
and
B GAIN
shades of red and blue color of the image.
WB
MODE
R GAIN
B GAIN
RETURN
The camera is always in day mode. The image is in color. Use this for
normal lighting conditions.
The camera is always in night mode. The image is black and white.
The IR LED turns on in low lighting conditions.
OFF
to disable the function.
MODE1
values from 0 to 255 to adjust the
MWB
5
5
and MODE2.
7
Advertisement
Table of Contents
