White Balance - Interlogix TruVision TVB-2403 Configuration Manual

HSBLC

White Balance

White balance tells the camera what the color white looks like. Based on this
information, the camera will then continue to display all colors correctly even
when the color temperature of the scene changes such as from daylight to
fluorescent lighting, for example.
Select MANUAL, ATW (Auto-tracking White Balance), or AWC→SET.
Select the following options under the White Balance menu:
TruVision HD-TVI 1080P Camera Configuration Manual
value, the brighter the image.
WDR OFFSET: Set the offset from 0 to 100. The higher the value,
the brighter the dark area of the image.
Highlight Suppression Backlight Compensation.
Use this function to mask strong light sources across a scene and
improve image quality. There can be up to four mask areas
configured.
SELECT: Select an HSBLC area.
DISPLAY: Select ON to enter a popup screen. Press the direction
buttons to define the area position and size.
LEVEL: Select the brightness level between 0 and 100. If the
brightness level is higher than the level you set, HSBLC is enabled.
MODE: Select ALL DAY or NIGHT. In ALL DAY mode, HSBLC works
all day. In NIGHT mode HSBLC only works at night.
BLACK MASK: Select the BLACK MASK status as ON or OFF. When
it is set to ON, the HSBLC is enabled. When it is set to OFF, the
HSBLC function is disabled.
DEFAULT: Select to restore the HSBLC area settings to default (see
below).
11