Switching Management Modes; Zyxel One Network (Zon) Utility; Requirements - ZyXEL Communications NWA50AX User Manual

See the NCC (Nebula Control Center) User's Guide for how to configure Nebula managed devices. See
Chapter 24 on page 189
address.
Note: Make sure your network firewall allows TCP ports 443, 4335, and 6667 as well as UDP port
123 so the device can connect to and sync with the NCC.
2.2 Switc hing Ma na g e m e nt Mo de s
The Zyxel Device is in standalone mode by default, with NCC and/or AC discovery enabled.
Sta nda lo ne - to - NC C
Register the Zyxel Device at the NCC website and then turn on the Zyxel Device. Make sure that
is enabled (see
Disc o ve ry
when it is discovered.
NC C - to - Sta nda lo ne
Unregister the Zyxel Device from the NCC organization/site. Reset the Zyxel Device to factory defaults
(see Section 26.6 on page
2.3 Zyxe l O ne Ne two rk (ZO N) Utility
ZON Utility is a program designed to help you deploy and manage a network more efficiently. It detects
devices automatically and allows you to do basic settings on devices in the network without having to
be near it.
The ZON Utility issues requests via Zyxel Discovery Protocol (ZDP) and in response to the query, the device
responds back with basic information including IP address, firmware version, location, system and model
name in the same broadcast domain. The information is then displayed in the ZON Utility screen and you
can perform tasks like basic configuration of the devices and batch firmware upgrade in it. You can
download the ZON Utility at www.zyxel.com and install it on your computer (Windows operating system).
2.3.1 Re q uire m e nts
Before installing the ZON Utility on your PC, please make sure it meets the requirements listed below.
O pe ra ting Syste m
At the time of writing, the ZON Utility is compatible with:
• Windows 7 (both 32-bit / 64-bit versions)
• Windows 8 (both 32-bit / 64-bit versions)
• Windows 8.1 (both 32-bit / 64-bit versions)
• Window 10 (both 32-bit / 64-bit versions)
Chapter 2 AP Management
if you want to change the Zyxel Device's VLAN setting or manually set its IP
Section 9.4 on page 73). The NCC manages the Zyxel Device automatically
205).
NWA50AX User's Guide
22
NC C