ZyXEL Communications NWA50AX User Manual page 43

Table 13 Starting and Stopping the Zyxel Device
MET HO D DESC RIPT IO N
Using the RESET button If you press the
configuration to its default values and then reboots. See
more information.
Clicking Clicking
Ma inte na nc e
cached data to the local storage and stops the system processes. Wait for the Zyxel
> Shutdo wn >
or using the Device to shut down and then manually turn off or remove the power. It does not turn off
Shutdo wn
shutdown command the power.
Disconnecting the Power off occurs when you turn off the power to the Zyxel Device. The Zyxel Device simply
power turns off. It does not stop the system processes or write cached data to local storage.
The Zyxel Device does not stop or start the system processes when you apply configuration files or run
shell scripts although you may temporarily lose access to network resources.
Chapter 5 Standalone Configuration
button on the back of the Zyxel Device, the Zyxel Device sets the
RESET
Ma inte na nc e > Shutdo wn > Shutdo wn
NWA50AX User's Guide
43
Section 26.6 on page 205
or using the shutdown command writes all
for