ZyXEL Communications NWA50AX User Manual page 171

Table 72 Maintenance > File Manager > Configuration File (continued)
L ABEL DESC RIPT IO N
Apply Use this button to have the Zyxel Device use a specific configuration file.
Click a configuration file's row to select it and click
configuration file. The Zyxel Device does not have to restart in order to use a different
configuration file, although you will need to wait for a few minutes while the system
reconfigures.
The following screen gives you options for what the Zyxel Device is to do if it encounters an error
in the configuration file.
Im m e dia te ly sto p a pplying the c o nfig ura tio n file
leave the rest of the configuration blank. If the interfaces were not configured before the first
error, the console port may be the only way to access the Zyxel Device.
Im m e dia te ly sto p a pplying the c o nfig ura tio n file a nd ro ll b a c k to the pre vio us c o nfig ura tio n
this gets the Zyxel Device started with a fully valid configuration file as quickly as possible.
Ig no re e rro rs a nd finish a pplying the c o nfig ura tio n file
configuration file and generates error logs for all of the configuration file's errors. This lets the
Zyxel Device apply most of your configuration and you can refer to the logs for what to fix.
Ig no re e rro rs a nd finish a pplying the c o nfig ura tio n file a nd the n ro ll b a c k to the pre vio us
c o nfig ura tio n
the configuration file's errors, and starts the Zyxel Device with a fully valid configuration file.
Click
O K
the screen.
# This column displays the number for each configuration file entry. This field is a sequential value,
and it is not associated with a specific address. The total number of configuration files that you
can save depends on the sizes of the configuration files and the available flash storage space.
File Name This column displays the label that identifies a configuration file.
You cannot delete the following configuration files or change their file names.
The
syste m - de fa ult.c o nf
Apply
included when you upload a firmware package.
The
sta rtup- c o nfig .c o nf
make and save changes during your management session, the changes are applied to this
configuration file. The Zyxel Device applies configuration changes made in the Web
Configurator to the configuration file when you click
changes made via commands when you use the write command.
The
la stg o o d.c o nf
Zyxel Device last restarted. If you upload and apply a configuration file with an error, you can
apply lastgood.conf to return to a valid configuration.
Size This column displays the size (in KB) of a configuration file.
Chapter 18 File Manager
- this applies the valid parts of the configuration file, generates error logs for all of
to have the Zyxel Device start applying the configuration file or click
file contains the Zyxel Device's default settings. Select this file and click
to reset all of the Zyxel Device settings to the factory defaults. This configuration file is
file is the configuration file that the Zyxel Device is currently using. If you
is the most recently used (valid) configuration file that was saved when the
NWA50AX User's Guide
171
to have the Zyxel Device use that
Apply
- this is not recommended because it would
- this applies the valid parts of the
or . It applies configuration
Apply O K
-
to close
C a nc e l