Wds Link Info - ZyXEL Communications NWA50AX User Manual

Table 21 Monitor > Wireless > Station Info (continued)
L ABEL
SSID Name
Security Mode
Signal Strength
Tx Rate
Rx Rate
Association Time
Refresh
8.6 WDS L ink Info
Use this screen to view the WDS traffic statistics between the Zyxel Device and a root AP or repeaters.
See Section 1.2 on page 12
this screen.
Monitor > Wireless > WDS Link Info
Fig ure 34
The following table describes the labels in this screen.
Table 22 Monitor > Wireless > WDS Link Info
L ABEL
WDS Uplink Info
WDS Downlink
Info
#
Chapter 8 Monitor
DESC RIPT IO N
This indicates the name of the wireless network to which the station is connected. A single AP
can have multiple SSIDs or networks.
This indicates which secure encryption methods is being used by the station to connect to the
network.
This is the RSSI (Received Signal Strength Indicator) of the station's wireless connection.
This is the maximum transmission rate of the station.
This is the maximum reception rate of the station.
This displays the time the station first associated with the Zyxel Device's wireless network.
Click this to refresh the items displayed on this page.
to know more about WDS. Click
DESC RIPT IO N
refers to the WDS link from the repeaters to the root AP.
Uplink
refers to the WDS link from the root AP to the repeaters.
Do wnlink
When the Zyxel Device is in root AP mode and connected to a repeater, only the downlink
information is displayed.
When the Zyxel Device is in repeater mode and connected to a root AP directly or via another
repeater, the uplink information is displayed.
When the Zyxel Device is in repeater mode and connected to a root AP and other repeater(s),
both the uplink and downlink information would be displayed.
This is the index number of the root AP or repeater in this list.
NWA50AX User's Guide
Mo nito r > Wire le ss > WDS L ink Info
62
to access