Working With The Max-On Rx3I Configuration Utility - Emerson PACSystems RX3i User Manual

User Manual
GFK-2409B
4.2 Working with the Max-ON RX3i Configuration
Utility
Now that you have created a Max-ON RX3i Project and launched the Max-ON RX3i
Configuration Utility, you can set the parameters of the redundant system. When the
Max-ON RX3i Configuration Utility is launched it will display the following:
Figure 26:
As you can see from the Project Navigator, the utility allows you to specify the following
information about the Max-ON RX3i redundant system:
•
•
•
•
•
•
•
Note
Developer and End User Information
By selecting the Developer and End User items in the Project tree, the information about the
engineer who developed the application –and- the end user may be displayed and modified.
To edit this biographical information, double-click on the Developer or End User item in the
project tree or select the Edit > Properties menu item. The Biographical Information dialog
is now displayed, and the detailed information may be entered and saved.
The Max-ON RX3i Configuration Utility
Developer: Biographical information of the engineer who developed the
application.
End User: Biographical information about the end user.
Settings: Specifies the Max-ON RX3i System Parameters.
Sync Data: Specifies the synchronization data that is to be transferred from the
Master CPU to the Backup CPU for the redundant system to be synchronized.
Sync Networks: Specifies the Ethernet LAN configuration to be used to transfer the
Synchronized Data.
Genius Busses: Specifies the Genius Busses used by the redundant system for Genius
I/O.
User Alarms: Allows the user to create self-defined faults that can be logged by the
Max-ON RX3i redundant application.
User Alarms are not available in the current version of Max-ON RX3i Diagnostics.
Chapter 4
Oct 2019
26