User Manual
GFK-2409B
4.2.3
User Defined Alarms
The user may post user defined faults from within the application. However, before the Max-
ON RX3i Diagnostics can display the user alarms, they must be configured.
Note:
Adding a User Alarm
1. Select the User Alarms item in the Max-ON RX3i Configuration Utility Project tree.
Figure 55:
2. Select the User Defined Alarms > Add Alarm... menu item.
3. Enter an Alarm Number and the corresponding Alarm Description. Note: The Alarm
Figure 56:
The Max-ON RX3i Configuration Utility
User Defined Alarms are not available in the current version of the Max-ON RX3i Diagnostics.
Number must be within the numerical range 3840..4095. The descriptor may be up
to 60 characters in length.
Chapter 4
Oct 2019
45