Step 3 - Use The Max-On Rx3I Diagnostic Tool - Emerson PACSystems RX3i User Manual

User Manual
GFK-2409B
This will launch the View project to run on your PC
8.3 Step 3 – Use the Max-ON RX3i Diagnostic Tool
Once the Diagnostic Tool starts on your PC, the main Diagnostics page will be displayed:
Figure 113
System Status
Alarms
Project Info
Authorization
Please note that if the Diagnostic Tool is not communicating with the PLCs,
displayed for the items.
The
Alarm condition.
Diagnostic Tools
Clicking on this tab displays the Real-time Status page. The page
contains information on scan times, update rates, and PLC status.
Clicking on this tab will bring up the Alarm Table display page. This
page lists any alarms that have been archived within the PLCs that
have active connections. Alarms may be cleared from this display
page.
Clicking on this tab will display the Project Information page.
Catalog number, version number, program checksum, and other
items are displayed.
Clicking on this tab will display the Authorization page that indicates
if the system is operating in Demo mode or not.
symbol indicates a Latched Alarm condition, where a
Chapter 8
Oct 2019
a will be
symbol indicates a current
103