User Manual
GFK-2409B
D-1.3
Add EGD Exchanges to PLC A
Select the target named PLC_A_HW. Right-click on the target to display the pop-up menu.
Click on "Add Component ►Ethernet Global Data". A new component named "Ethernet
Global Data" will be added to the target.
Figure 129
Set the Producer ID
Go to the Navigator window and click on Ethernet Global Data so that you may edit the
properties.
Go to the Inspector window and edit Local Producer ID so that the IP address corresponds
to the IP address that was set for the Primary LAN Ethernet module in PLC A.
Updating an Existing Application
Appendix D
Oct 2019
123