D-1.4 Add Egd Exchanges To Plc B - Emerson PACSystems RX3i User Manual

User Manual
GFK-2409B
MxnProd2 (Secondary LAN)
Offset (Byte.Bit) Variable
Status
0.0
D-1.4 Add EGD Exchanges to PLC B
Select the target named PLC_B_HW. Right-click on the target to display the pop-up menu.
Click on "Add Component ►Ethernet Global Data". A new component named "Ethernet
Global Data" will be added to the target.
Figure 140
Updating an Existing Application
Ref Address Ignore
%W49629
%W40001
Appendix D
Length Type
1 WORD
76 WORD
Oct 2019
129