Winch Switch - Polaris GENERAL 2016 Service Manual

Table of Contents

WINCH SWITCH

1. Disconnect the winch switch harness on the back

side of the center console by depressing the

connector locks and pulling on the connector. Do not

pull on the wiring.

2. Test between the 3 sets of outputs (ON / OFF / ON). If

any of the tests fail, replace winch switch assembly.

• Move the switch to Position 1, ON. There should be

continuity (< 1 Ω) between switch pins 2 and 3.

• Move the switch to Position 2, OFF. There should

be NO continuity (∞ - OL) between switch pins 2

and 3; 1 and 2.

• Move the switch to Position 3, ON. There should be

continuity (< 1 Ω) between switch pins 1 and 2.

9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual

Table of Contents