Digital Wrench® Version And Update Id; Digital Wrench® Updates - Polaris GENERAL 2016 Service Manual

Table of Contents

DIGITAL WRENCH® VERSION AND UPDATE

Knowing what Digital Wrench® version and update is

installed will help determine which updates are required.

Versions and updates are subject to change.

1. Open the Digital Wrench® software. Locate the

version ID shown on the lower right side of the Digital

Wrench® start-up screen.

2. Proceed to http://polaris. diagsys. com to see if a

newer update is available.

3. If a newer update is available, it should be

downloaded before using Digital Wrench®.

Always operate with the latest update.

9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual

DIGITAL WRENCH® UPDATES

Updates are released for Digital Wrench® via the

Internet at: http://polaris. diagsys. com. The Digital

Wrench® website can also be accessed through the

dealer website at: www.polarisdealers.com.

Only authorized Polaris dealers and distributors can

access the dealer website.

1. Log on to www.polarisdealers.com.

2. Locate the "Service and Warranty" drop-down

3. Click on "Digital Wrench Updates".

4. The Digital Wrench® portal website should appear in

a new web browser.

5. Click on "Digital Wrench Version Updates".

You must already have the current version installed

before adding an update. Updates will not install if you

are using an older version loaded on your PC.

Chapters

Table of Contents