BATTERY SERVICE
BATTERY SPECIFICATIONS
Polaris / Johnson Controls
Type
Sealed - Maintenance Free
Voltage
12 V
Nominal Capacity
30 AH
@ 10 HR Rate
CCA
575
Nominal Open
12.8 V or more.
Circuit Voltage
Recommended
1.8 A @ 5-10 HR or 6.0 A @ 1
Charging Rate
HR
IMPORTANT
Never attempt to open the battery. If the seal is broken,
the battery will be ruined and will fail within a few
weeks.
BATTERY REMOVAL
1. Remove the driver's seat to access the battery
2. Disconnect the black (negative) battery cable.
CAUTION
To reduce the chance of sparks: Whenever removing
the battery, disconnect the black (negative) cable first.
When reinstalling the battery, install the black (negative)
cable last.
3. Disconnect the red (positive) battery cable.
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.
4. Remove the battery hold-down bracket
battery out of the vehicle.
BATTERY REMOVAL (INTL)
1. Remove the driver's seat to access the battery
q
.
2. Disconnect the black (negative) battery cable.
To reduce the chance of sparks: Whenever removing
the battery, disconnect the black (negative) cable first.
When reinstalling the battery, install the black (negative)
3. Disconnect the red (positive) battery cable.
ELECTRICAL
w
. Lift the
q
CAUTION
cable last.
11.53
.
11