Momentary High Beam Switch; Winch Switch - Polaris Scrambler 1000 Owner's Manual

FEATURES AND CONTROLS
Switches
Scrambler Zugmachine Switches
Main Key Switch
Fog Light Switch

Momentary High Beam Switch

Press this switch with your left forefinger to activate the headlight high
beam. The lights will return to low beam when the switch is released.

Winch Switch

See page 84 for winch information.
Fog Light Switch
Use the fog light switch to turn the fog light on or off.
Mode/Reverse Override Switch
Press the switch to toggle through the speedometer display modes
(except in reverse). See page 45. To gain additional power while
operating in reverse, press the override switch before opening the
throttle. This will cancel the reverse speed limit function.
The reverse override switch also acts as a MODE switch when held
down for approximately one half second. See the instrument cluster
information beginning on page 45.
Tip: The override switch will not function as a MODE switch if the transmission
is in reverse.
Activating the override switch while the throttle is open can cause loss of control.
Do not activate the override switch while the throttle is open.
29