Table of Contents
Advertisement
Codes
Code 1
Calling up code 1
Press the following keys:
1.
+
simultaneously for approx. 4 s.
d
å
The "Service" menu appears.
2.
/
for "Code 1".
|
~
3.
to confirm.
d
4.
/
for the required group.
|
~
5.
to confirm.
d
6.
/
for the required coding address.
|
~
7.
to confirm.
d
8.
/
for the required value.
|
~
9.
to confirm.
d
"Adopted" appears briefly on the dis-
play.
General
Coding
Coding in the delivered condition
Detached house/apartment building
7F:1
Detached house, same holiday
program for all heating groups
Minimum temperature buffer sensor top
91:0
No minimum temperature
Hardware
Coding
Coding in the delivered condition
Additional boiler
Additional boil-
No additional boiler installed
er:No
Buffer
Buffer:3
No heating water buffer cylinder in-
stalled
46
10.
Exit the service menu.
ä
Overview
The coding addresses are displayed in groups, subject
to system configuration:
"General"
■
See page 46
■
"Hardware"
See page 46
■
"Heating"
See page 48
"Boiler"
■
See page 51
"DHW"
■
See page 53
■
"Additional heat source"
See page 53
Possible change
7F:0
Apartment building, holiday program
can be adjusted separately
91:0
If a combined heating water buffer
to
cylinder is installed, a minimum tem-
91:95
perature can be set for the top of the
buffer cylinder (captured by PTS 1).
Possible change
Additional boil-
Additional boiler installed
er:Yes
Buffer:3
Heating water buffer cylinder with 3
buffer temperature sensors installed
Buffer:4
Heating water buffer cylinder with 4
buffer temperature sensors installed
Buffer:5
Heating water buffer cylinder with 5
buffer temperature sensors installed
Advertisement
Table of Contents
