Viessmann Vitoligno 300-C Installation And Service Instructions Manual page 83

Code 1
(cont.)
Coding in the delivered condition
Feed screw conveyor maximum cycle
15:... Max. cycle limit of feed screw con-
veyor
Day hopper idle runtime (manual charging)
27:.... Rotary lock valve idle runtime with
manual charging of the boiler
Code is only available with manual
charging of the boiler.
Vacuum module post-flushing time
2B:... Run-on time of vacuum module
Code only available for charging
with mole.
Note
Risk of blockage
Day hopper idle runtime (autom. charging)
2C:... Rotary lock valve emptying time
before vacuum module starts.
Code is only available for charging
with vacuum module.
Discharge cycle - ON
30:... Cycle, discharge
(discharge runs for ... seconds)
Discharge cycle - OFF
31:... Pause, discharge
Discharge delay
32:... Discharge delay
External charging cycle - ON
40:... External charging cycle
(external charging runs
for ... seconds)
External charging cycle - OFF
41:... External charging pause
External charging delay
42:... External charging delay
Possible change
15:... Setting range in %
to
15:...
27:.... Setting range in minutes
to
27:....
2B:... Setting range in minutes
to
2B:...
2C:... Setting range in minutes
to
2C:...
30:2 Setting range in seconds
to
30:120
31:0 Discharge does not pause: Constant
operation
31:1 Setting range in seconds
to
31:100
32:0 Setting range in seconds
to
32:100
40:2 Setting range in seconds
to
40:120
41:0 External charging does not pause:
Constant operation
41:1 Setting range in seconds
to
41:100
42:0 Setting range in seconds
to
42:100
Codes
83