Using The Recording Timer; Recording A Radio Program Or Dab Service* Using The Recording Timer - Sony Giga Juke NAS-S55HDE Operating Instructions Manual

Using the Recording Timer

You can set the timer to record a radio program
or playback from an external component that
is connected to the AUDIO IN jack on the unit.
To use this function, the clock must be correctly
set beforehand (page 26 or 86). You can make a
maximum of 10 recording settings.
Note
The server function stops while the Recording Timer is
in progress.
Recording a radio program
or DAB service* using the
Recording Timer
You can record a radio broadcast or DAB service*
at a specified time. To do this, the clock and the
radio station must be set in advance.
1
Press TIMER.
The timer list appears.
2
Enter the Options menu and select
[New setting] – [FM/AM record] or
[DAB record].
* For the UK model only
3
Set each item.
In the pull-down menu, select and set
each item (shown in the "Settings for the
Recording Timer" on page 98).
4
Select [OK].
The setting is registered and appears in the
timer list.
5
Press TIMER or BACK.
The setting is set and the TIMER indicator
lights up.
To stop a timer recording
Press .
To continue recording after the
Recording Timer's end time
You can cancel the Recording Timer setting while
the timer is operating. When you do this, the end
time is cancelled and recording continues.
To cancel the setting, enter the Options menu
while the Recording Timer operation is in
progress and select [Timer cancel].
Notes
 After making the Recording Timer setting, you
cannot set another one that overlaps with the time
set for the previous one. You can do this, however, by
suspending the previous setting (page 100).
 You cannot set an end time for the Recording Timer
that is close to the current time.
 Certain functions will not perform during the
minute and half before a Recording Timer setting is
set to go off.
 The activation of the Recording Timer may be
delayed by certain operations if they are performed
shortly before the Recording Timer is set to start.
 If you do not add a title to a recording, the details of
the recording (i.e., the recording date and time) are
automatically used as the title.

GB