Table of Contents
Advertisement
The unit does not turn off.
The (power) button may not respond
while the unit is making the initial settings or
is still starting up.
The On/Standby indicator lights up orange
and the illumination panel flashes slowly while
the unit is analyzing the recorded materials.
If you want to cancel the analysis and turn off
the unit, press the button.
As long as the unit is active as a server and
the client device is playing audio data, the
server function remains active and the power
stays on even if you press the button to
turn the unit off (the display turns off and the
illumination panel slowly flashes). Press
to cancel the server function and turn off the
unit.
If you disconnect the power cord from the
wall outlet while the On/Standby indicator is
lit up red, the indicator may remain lit for a
little while longer.
There is noise from the unit or the unit
remains warm after the power is turned off.
When standby mode is set to "Quick start-
up", some parts of the internal system remain
active and the internal fan sometime activates.
Display
The display on the screen is distorted.
The unit is being subjected to shocks or
vibrations. Place the unit at a stable location.
On rare occasions, characteristics of the HDD
may cause some distortion in the display; this,
however, is not a malfunction.
Sound output
There is no sound.
Press the VOLUME +/– buttons or the
MUTING button to cancel muting. Sound
monitoring cannot be done while Recording
Timer is in progress.
Cancel pause.
Confirm that nothing is connected to the
PHONES (headphones) jack.
Check the connections of the external
component.
Connect the speaker cords firmly.
The right-left sound balance is bad or
reversed.
Connect the speakers and other devices
correctly.
The sound has no depth and seems to be
monaural.
Connect the speakers and other devices
correctly.
There is severe humming or noise in the
sound.
Connect the speakers and other devices
correctly.
Move the audio connecting cord away
from any display, fluorescent light, or other
electrical devices.
Move the unit away from any display or TV.
If plugs or jacks are dirty, wipe them with a
cloth slightly moistened with alcohol.
The inserted disc is scratched or dirty.
111
GB
Hide quick links:
Advertisement
Table of Contents
