Setting The Standby Mode - Sony Giga Juke NAS-S55HDE Operating Instructions Manual

Setting the standby mode

1
Enter the Settings menu and select
[System setting].
2
Select [Standby mode].
3
Select [Quick start-up] or [Standard
(power save)].
Quick

start-up
(On/Standby
indicator:
orange)
Standard
(power save)
(On/Standby
indicator:
red)
( : Factory setting)

4
Select [Close].
Tips
 If you press the  (power) button while the unit is
analyzing audio data, the On/Standby indicator lights
up orange.
 When the standby mode is set to "Quick start-up",
the internal fan sometimes turns on automatically
even when the power is turned off. This is not a
malfunction.
10
GB
The unit responds quickly
to operations that you
make after the power is
turned on. This setting
results in high power
consumption.
The server function can be
used in this mode.
The unit responds
slowly to operations
that you make after the
power is turned on. This
setting saves on power
consumption.
The server function
cannot be used in this
mode.
To enable the automatic
demonstration
When you turn on the unit for the first time
after purchase, a demonstration video begins
playing automatically. If you disconnect the
power cord, and then turn on the unit again,
the demonstration video will play again (as the
automatic demonstration setting is set to [On]).
If you do not want to view the demonstration
video, do the following procedure to change the
setting.
1
Enter the Settings menu and select
[System setting].
2
Select [Auto demonstration].
3
Select [On] or [Off ].
4
Select [Close].