Sony Giga Juke NAS-S55HDE Operating Instructions Manual page 77

6
Select [Access point setting]
– [Search for available access point].
An SSID list of connectable access points
appears.
The SSID (Service Set Identifier) is used to
identify the access point within the wireless
network.
7
Select the access point from the
search results.
8
Set the network key.
A network key (security key) is required
only when [WEP] appears as the security
setting. If you do not know the security key,
check the access point setting. After entering
the key, select [Save].
9
Select [Close].
The wireless network setting is completed.
To confirm if the unit is connected to
the network
Select [Check connections] in the network setting
display.
If the unit has difficulty connecting to the
network, check the access point setting and IP
address setting ("Confirming and changing the
network settings" on page 81).
Tip
You can set the access point manually by selecting
[Manual setting] in step 6.

GB