Canceling Automatic Demonstration - Sony Giga Juke NAS-E300HD Operating Instructions Manual

Canceling automatic demonstration

The display on this unit is factory set
to automatically light up and play back
demonstration images even when the power is
turned off.
To enable automatic demonstration, do the
following.
1
Press  (power) to turn off the
unit.
The standby indicator lights up.
If you are plugging in the unit for the first
time and the demonstration starts, go to step
2.
2
Press DISPLAY repeatedly until the
clock display (–– : ––) or the power
save mode display (no display)
appears.
Each time you press DISPLAY, the display
changes as follows.
Demonstration  Power save (no display)

 Clock  Demonstration  ...
( : Factory setting)

Selecting the clock or power save mode
display will cause the demonstration images
to stop appearing. (The clock display appears
for 8 seconds, and then it disappears.)
Selecting the demonstration display will cause
the demonstration images to appear in the
following situations:
 When the power is turned off
 When no operation has been performed
for 15 minutes while the unit is on (only
when the HDD, CD, or WM-PORT/USB
function is selected).
1
GB