Formatting The System - Sony Giga Juke NAS-E300HD Operating Instructions Manual

Formatting the system

This function formats the unit and restores it to
the condition it was in at the time of purchase.
Note that this process deletes all settings and
information (e.g., audio data recorded or imported
in the HDD, clock setting, etc.). Factory-installed
sample data (Demo Tracks) in the HDD will be
deleted as well.
You cannot format the unit to the factory setting
while the display setting for a display that appears
while the unit is turned off is set to the power save
mode. Set the display to demonstration.
This function can be performed only with the
buttons on the main unit.
HDD

BACK
1
Disconnect and reconnect the power
cord, and then turn on the unit.
2
Press HDD to select the HDD
function.
3
4
To cancel formatting
Select "Cancel" in step 4.
Note
You should never turn off the unit or disconnect the
power cord during the formatting of the system.
HDD REC
 /  /ENTER
Press  and BACK together with
HDD REC.
"HDD Format" appears in the display.
Press / to select "OK", and then
press ENTER.
Formatting starts.
When formatting completes, the unit turns
itself off.
All user-configured settings, such as preset
radio stations, timer settings, and the clock
settings are initialized.
1
GB