Table of Contents
Advertisement
To cancel recording
Press .
To record individual tracks
1
Press and load a disc in the disc
tray, and then press CD to select the
CD function (page 35).
2
Press HDD REC .
The unit changes to the recording standby
mode.
3
Press / to select the desired track,
and then press ENTER.
Recording starts.
If you select "All Track", all tracks in the disc
are recorded.
To change the recording speed
The recording speed of the HDD REC button
can be set. Make sure to make the setting before
you perform a recording operation.
1
Press CD to select the CD function.
2
Press OPTIONS.
3
Press / to select "REC Speed", and
then press ENTER.
4
Press / to select "Normal Speed"
or "High Speed", and then press
ENTER.
Normal Speed
Recording is done at normal
speed. Sound monitoring
during recording is possible
in this mode.
High Speed
Recording is done
approximately four times
faster than normal recording.
Sound monitoring during the
recording is not possible in
this mode.
(: Factory setting)
To record desired tracks only
You can record only the tracks that you desire by
registering them to a program. Create the program
before recording the tracks (page 44).
1
Press CD to select the CD function.
2
Do the procedure of step 1 to 4
of "Creating your own program
(Program play)" (page 44) to create a
program.
3
Press HDD REC while the unit is
stopped.
4
Press / to select "All Step", and
then press ENTER.
Notes
When recording a CD, the unit may produce more
noise and vibration than during CD playback. This is
because of the higher disc rotation speed used during
recording and is not a malfunction. The amount of
noise or vibration produced will vary depending on the
CD type.
If the title information contains characters that the
unit cannot display, those characters are replaced by an
underscore ("_").
If you record audio data which does not have track
marks (for example, a recording of a live concert), the
unit automatically adds track marks and inserts several
seconds of blank space between songs.
Tips
If title information cannot be found or incorrect, use
the "Title Updater" software to add the latest title
information (page 46). You can edit title information
as well (the unit supports alphanumeric character and
symbol input) (page 52).
If you record only one track, the track is stored to the
following location in the HDD.
"(Favorite)" folder in the artist directory "REC 1"
folder in the album directory track name in the
track directory
GB
Hide quick links:
Advertisement
Table of Contents
