Table of Contents
Advertisement
Cancelling automatic demonstration
The display on the remote control is factory set to
automatically light up and playback demonstration
images when the power is turned off.
To disable automatic demonstration, do the
following.
1
Select [Settings] from the Home
menu.
Settings menu appears.
2
Select [Common Setting] –
[Demonstration].
3
Select [Off ].
To start the automatic demonstration, select
[On]*
.
1
*
Factory setting
1
2
GB
About automatic demonstration
If you set the clock, the demonstration setting is
automatically set to [Off] and it does not start.
When the demonstration display setting is set
to [On], the demonstration will start playing
automatically after 60 seconds of inactivity (when
the power is turned off and the remote control is
placed on the charger).
Advertisement
Table of Contents
