Table of Contents
Advertisement
Preparing the machine
1
3
Polarized For UL, CSA
WARNING (For U.S.A., Canada only)
This appliance has a polarized plug (one blade
wider than the other). To reduce the risk of
Polarized power supply socket
electric shock, this plug is intended to fit in a
polarized socket-outlet only one way.
If the plug does not fit fully in the polarized
socket-outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to install
the proper polarized socket-outlet.
Do not modify the plug in any way.
A
OFF
A
B
Machine-ON
Light-OFF
B
C
Machine-ON
Light-ON
C
When you do not use the sewing machine:
1. Turn the power/light switch off. (Position A)
2. Pull the machine plug out from the socket-outlet.
3. Never place anything on the foot control.
9
Attaching the foot control
2
1. Plug foot control into machine-socket-inlet.
1. Plug foot control into machine-socket-inlet.
2. Plug foot control into socket-outlet.
2. Plug foot control into socket-outlet.
3. Lay your foot on the foot control.
Be sure to turn OFF the power switch before plugging/un-
plugging the controller.
Polarized
socket-outlet
On/Off of the power/light switch
A Position
B Position turns the power switch on, and sewing operation is
performable. The sewing light remains off.
C Position
CAUTION :
Perform these following steps when you are not using your
sewing machine.
1. Turn the power/light switch off. (Press
2. Be sure to remove the power plug from the wall outlet.
3. Do not place a thing on the foot controller.
Press firmly on the foot control to increase sewing speed.
Press lighty on the foot control to decrease sewing speed.
CAUTION :
turns the power switch off.
turns on both the power switch and sewing light.
side).
Advertisement
Table of Contents
