Table of Contents
Advertisement
2-thread chainstitch
A
C
B
D
2-thread chainstitch (Purple)
(1)
Raise the upper knife.
(2)
Remove the right and left-hand needles.
(3)
Thread the chainstitch looper and needle.
(4)
Open the looper cover and turn the handwheel towards you
until the upper looper is in its lowest position (A).
(5)
Push the upper looper release back to disengage the looper (B).
(6)
Remove the knife guard (C) and attach the chainstitch seam
guide plate (D).
(7)
Close the looper cover.
Important : When you have finished chainstitch sewing, remove the
seam guide plate and replace the knife guard, lock the
upper looper, lower the knife and close the looper cover.
25
24
Advertisement
Table of Contents
