Table of Contents
Advertisement
Threading
Thread the machine carefully and in the correct sequence.
This is important for making beautiful seams.
Preparation
Switch the machine off (power switch"O")
1. Retractable support rod with thread guide must be fully raised.
2. Open the looper cover and cloth plate.
3. Turn the handwheel toward you until the needles are fully raised.
4. Release the upper knife.
Thread the machine carefully and in the correct sequence.
Invaluable threading aids simplify threading:
・ colored threading illustration
・ color coded thread path on the machine.
・ threading accessories.
17
Thread guide plate
Slide thread into the two slits to form an S-loop.
Threading the tension dials
To lay the thread correctly between the tension discs, pull the thread
lightly with both hands.
Needle threader
Insert the needle threader through the back of the needle eye or the
looper eye then thread the needle threader. Pull the needle threader
back until it pulls through the eyelet.
Advertisement
Table of Contents
