Threading: 4-Thread Overlock - JUKI MO-655N Instruction Manual

Threading: 4 thread overlock
7
14
13
12
8
11
9
10
13
12
11
25
26
1
2
3
4
5
6
10
1. Upper looper thread (Blue)
Place the spool on the spool pin right under blue marking on the
retractable support rod
thread guide.
(1,2) Bring thread up from the rear of the retractable support rod
thread guide with blue marking to the front of it.
(3,4) Pass the thread through the thread guide plate. Looping as
shown.
(5) Bring the thread on to the thread guide.
(6) Snap the thread into the thread tension dial discs.
(7,8,9,10,11,12) Thread the thread guides
(13) Turn the handwheel until the upper looper is fully raised.
Thread upper looper eye.
(14) Pull about 10 cm of the thread out.
Place the thread under the presser foot, and pull the thread
from behind the presser foot.