Table of Contents
Advertisement
Threading: 5-thread overlock (chainstich & wide 3-thread overlock)
7
6
8
9
10
A
5
4
6
3
7
2
8
1
9
23
24
1
2
3
4
5
B
5
4
6
3
7
2
8
1
9
Left-hand needle (brown)
If chainstitch is sewn with a wide 3 thread overlock, use the left-
hand needle and follow the brown markings. Place the spool on the
spool pin under the brown markings on the thread guide.
(1)
Bring the thread up from the spool and take it from back to
front through the brown guide.
(2,3) Pass the thread through the thread guide bar.
(4)
Thread the thread tension dial.
(5,6) Thread the thread guides.
(7)
Thread the center notch of the take-up cover.
(8)
Thread the guide.
(9)
Thread the guide on the needle clamp.
(10) Thread the left-hand needle from front to back and lay the
thread to the left under the presser foot.
・ Chainstitch needle thread tension: 2.5 - 4.5 (A)
・ Left-hand needle thread tension: 6-7 (B)
・ Upper and lower looper thread tension: 3 - 5
When threading is complete
After threading, lower the foot and upper knife (if raised).
Close the looper and cloth plate covers. Switch the machine on.
Advertisement
Table of Contents
