Table of Contents
Advertisement
Threading: 5-thread overlock (chainstich & 3-thread overlock)
1
2
3
4
3
7
4
5
4
9
10
22
21
8
11
6
12
8
7
11
6
5
13
4. Chainstitch looper thread(purple)
Place the spool on the spool pin right under the purple marking on
the retractable support rod thread guide.
(1,2) Bring the thread up from the spool and take it from back to
front through the purple guides.
(3,4) Thread guides on back of machine and inside the cloth plate.
(5,6) Thread the tension.
(7)
Place the thread horizontally in the guide.
(8)
Thread the guide.
(9,10) Push the chainstitch looper auto-threader up towards the
chainstitch looper and press them down together.
(11) Thread the auto-threader.
(12) Thread the looper eye from front to back and cut thread back
to about 8 cm (3").
(13) Press the looper to the right and it will return to its normal posi-
tion.
Note: If the chainstitch looper thread has to be rethreaded, cut the
chainstitch needle thread at the eye and remove. Thread the
looper first and then the needle.
Advertisement
Table of Contents
