Omron FH Series Hardware Setup Manual page 88

5 Setup and Wiring
 Side Mounting
 Bottom Mounting
5-8
• Left side
4-M4 depth 4.5 (mounting screw hole)
143
* Recommended tightening torque: 1.2 N•m to 1.3 N•m
* The tolerance is ±0.2 mm.
• Bottom
4-M3 depth 4.5 (mounting screw hole)
* Do not remove the Insulating leg. Fix the Insulating leg to secure the ventilation path.
* Recommended tightening torque: 0.54 N•m to 0.6 N•m
* The tolerance is ±0.2 mm.
FH Series Vision System Hardware Setup Manual for 3D Robot Vision (Z436-E1)
• Right side
4-M4 depth 4.5 (mounting screw hole)
19.2
19.5 143
182.5
20.1
Insulating leg: 4
26.7 148.5
(Unit: mm)
(Unit: mm)