Omron FH Series Hardware Setup Manual page 51

Indicator Lamps
Supply Voltage
Current consumption
Built-in FAN
Usage Environ-
ment
FH Series Vision System Hardware Setup Manual for 3D Robot Vision (Z436-E1)
Series
Type
Model
SD Card I/F
Main
Ethernet
SD Card
EtherCAT
Ambient temperature range
Ambient humidity range
Ambient atmosphere
Vibration tolerance
Shock resistance
Noise immunity Fast Transient
Burst
Grounding
FH-5000 Series
High-speed, Large-capacity Controller(4 cores)
FH-5050
SDHC x 1
POWER: Green
ERROR: Red
RUN: Green
ACCESS: Yellow
NET RUN1: Green
LINK/ACT1: Yellow
NET RUN2: Green
LINK/ACT2: Yellow
SD POWER: Green
SD BUSY: Yellow
ECAT RUN: Green
LINK/ACT IN: Green
LINK/ACT OUT: Green
ECAT ERR: Red
20.4 VDC to 26.4 VDC
4.2A max.
Yes
Operating: 0°C to +45°C
Storage: -20 to +65°C (with no icing or condensa-
tion)
Operating and storage: 35 to 85% (with no conden-
sation)
No corrosive gases
Oscillation frequency: 10 to 150 Hz, Half amplitude:
0.1 mm, Acceleration: 15 m/s
Sweep time: 8 minute/count, Sweep count: 10, Vi-
bration direction: up and down/front and behind/left
and right
2
Impact force: 150 m/s
Test direction: up and down/front and behind/left and
right
•
DC power:
Direct infusion: 2 kV, Pulse rising: 5 ns, Pulse
width: 50 ns, Burst continuation time: 15 ms/0.75
ms, Period: 300 ms, Application time: 1 min.
•
I/O line:
Direct infusion: 1 kV, Pulse rising: 5 ns, Pulse
width: 50 ns, Burst continuation time: 15 ms/0.75
ms, Period: 300 ms, Application time: 1 min.
Class D grounding (100 Ω or less grounding resist-
*1
ance)
3 Configuration
2
3-3
3