12: Macro - Roland V-8HD Reference Manual

12: MACRO

Menu item Value
1: DEMO
EXECUTE
100: MACRO100 (*6)
ALL,
INITIALIZE
100: MACRO100 (*6)
1: DEMO
100: MACRO100 (*6)
Menu item
1: (operation name)–
10: (operation name)
LIST EDIT
PREVIEW
COPY MACRO TO
SWAP MACRO WITH
1: DEMO
NAME EDIT
100: MACRO100 (*6)
LOAD FROM USB
ENTER
MEMORY
SAVE TO USB MEMORY
ENTER
When "MACRO" is selected on the [MODE] button, this sets how many buttons function as macro selection buttons.
8
NUMBER OF MACRO SW
24
ENTER
Specifies the macro assigned to each button.
Menu item
SW ASSIGN
MACRO 1–8
PGM/A 1–8 (*7)
PST/B 1–8 (*7)
(*6) If you edited a macro's name using "NAME EDIT, " the edited name is shown.
(*7) This can be set if "NUMBER OF MACRO SW" is "24. "
Explanation
(Bold: default)
Select a macro (a series of recorded operations) to execute.
1– Press the [VALUE] knob to execute the macro.
If MODE is macro (the [MODE] button is lit orange), you can use the AUX / PinP SOURCE /
MEMORY [1]–[8] buttons to execute macros 1–8.
Selects the macro to be initialized.
1: DEMO 1–
Press the [VALUE] knob to initialize the macro.
Selects the macro to edit.
1–
Press the [VALUE] knob to show the operations recorded in the macro.
Value
—
EXEC
1: DEMO 1–
100: MACRO100 (*6)
1: DEMO 1–
100: MACRO100 (*6)
1– Selects the macro to be renamed.
Press the [VALUE] knob to access the screen for editing the name.
Shows a list of the macro setting files (.RMF) that are on the USB flash drive.
You can select a macro setting file and load the macro (1–100) into the unit.
Shows a list of the macro setting files (.RMF) that are on the USB flash drive.
You can select the macro settings file used to overwrite the macro (1–100) to the USB flash
drive. If you selected "NEW FILE..., " a new macro settings file is saved.
Macro 1–8:
Macro 1–8:
Macro 9–16:
Macro 17–24:
Displays the following SW ASSIGN menu.
Value
1: DEMO 1–
100: MACRO100 (*6)
Explanation
Shows the list of operations recorded in the macro.
"----------" is shown if no operations are recorded.
Select an operation or "ADD NEW FUNCTION" and press the [VALUE] knob to display the
FUNCTION EDIT menu (p. 80) for editing the operation.
Previews the macro.
Specifies the macro copy source.
Press the [VALUE] knob to copy the macro.
Specifies the macro swap destination.
Press the [VALUE] knob to swap the macro.
AUX / PinP SOURCE / MEMORY [1]–[8] buttons
AUX / PinP SOURCE / MEMORY [1]–[8] buttons
Cross-point A [1]–[8] buttons,
Cross-point B [1]–[8] buttons
Explanation
AUX / PinP SOURCE / MEMORY [1]–[8] buttons
Cross-point A [1]–[8] buttons
Cross-point B [1]–[8] buttons
Menu List
79