Table of Contents
Advertisement
Panel Descriptions
Top Panel/Side Panel
Side Panel
19
2
3
4
5
No.
Name
1
USB MEMORY port
[MENU] button
[=] [
] buttons
CURSOR
[ ] [ ] buttons
2
[EXIT] button
[ENTER] button
[VALUE] knob
[POSITION] joystick
[SIZE] knob
3
[CONTROL] button
4
AUX [1]–[10] buttons
5
Cross-point [1]–[10] buttons
6
PREFERENCE indicators
8
1
11
This is for connecting a USB flash drive. You use this when importing still images, or when saving or loading settings.
When this is turned on (lighted), the menu is displayed on the multi-view monitor connected to the HDMI OUT connector.
These select menu categories and menu items.
These switch between menu pages.
This exits the menus. When the system is at a lower-level menu, these return operation to the upper menu.
This moves to lower-level menus and executes operations.
This changes setting values for menu items.
This adjusts the display position of the input video, final video output, or PinP inset screen.
You use the [CONTROL] button to select the video to adjust.
This enlarges or reduces the size of the input video, final video output, or PinP inset screen.
You use the [CONTROL] button to select the video to adjust.
This selects an item to manipulate using the [POSITION] joystick or the [SIZE] knob.
Each press of the [CONTROL] button makes the indicator on the right change in the sequence shown below, displaying
the item to work with.
INPUT
g
OUTPUT
g
Input video
Final output video
These show the input status of signals sent to the AUX bus (input channels 1–10) and input to cross-points.
A signal (input channel 1–10) is being sent to the AUX bus. You can use the AUX [1]–[10]
Lighted in red
buttons to change the signal sent to the AUX bus.
Lighted in green Valid video is input.
Dark
No video is input.
These select the final video output and preset video (the video to output next).
PGM section
The button for the final-output channel lights up in red.
These select the preset video (the video to output next) or the video source for a PinP inset
screen or other video compositing.
PST/EFFECT
section
The selected button lights up in green. While compositing of the video is in progress it
lights up in red.
* The system functions as just described when the operation mode is set to "PGM/PST mode. " Operation differs when in
the A/B mode.
These indicate the status of synchronization.
INTERNAL
This lights up when synchronized to the V-800HD MK II's internal clock.
This lights up when synchronized to an external source.
EXTERNAL
It flashes when synchronization to an external source is not in effect.
6
7
9
12
13
14
15
16
17
Explanation
PinP
g Dark
Inset screen
8
Side Panel
20
10
17
18
Page
p. 31
p. 32
p. 13
p. 19
p. 27
p. 17
p. 22
p. 21
Hide quick links:
Advertisement
Table of Contents
