2 Hardware Installation
2.1 Rear Panel
LABEL
LAN 10/100M
WAN 10/100M
POWER 9 VAC
After you've made the connections, connect the power cable to a power supply and look at the front panel LEDs.
RESET
Prestige 334W Quick Start Guide
Use an Ethernet cable to connect at least one computer for initial Prestige configuration. These
ports are auto-negotiating (can connect at 10 or 100Mbps) and auto-sensing (automatically
adjust to the type of Ethernet cable you use (straight-through or crossover)).
Connect your cable/DSL modem to this port with the cable that came with your modem.
Connect the end of the included power adaptor (use only this adapter) to this power socket.
You only need to use this button if you've forgotten the Prestige's password. It returns the
Prestige to the factory defaults (password is 1234, LAN IP address 192.168.1.1. See your User's
Guide for details).
DESCRIPTION
2