Table of Contents
Advertisement
28
GETTING TO KNOW YOUR VEHICLE
P
T
M
ROGRAMMING
HE
EMORY
To create a new memory profile, perform the
following:
NOTE:
Saving a new memory profile will erase an existing
profile from memory.
1. Place the vehicle's ignition in the ON position.
2. Adjust all memory profile settings to desired
preferences (i.e., seat and radio station
presets).
3. Push the set (S) button on the memory switch,
and then push the desired memory button
(1 or 2) within five seconds. The instrument
cluster display will display which memory
position is being set.
NOTE:
Memory profiles can be set without the vehicle in
PARK, but the vehicle must be in PARK to recall a
memory profile.
L
A
U
T
INKING
ND
NLINKING
K
E
K
F
EYLESS
NTRY
EY
OB
Your remote keyless entry key fob can be
programmed to recall one of two saved memory
profiles.
F
NOTE:
EATURE
Before programming your key fob you must select
the "Memory Linked To FOB" feature through the
Uconnect Settings Ú page 165.
To program your key fob, perform the following:
1. Place the vehicle's ignition in the OFF
position.
2. Select the desired memory profile (1) or (2).
3. Push and release the set (S) button on the
memory switch, then within five seconds push
and release the button labeled (1) or (2)
accordingly. "Memory Profile Set" (1 or 2) will
display in the instrument cluster display.
4. Push and release the lock button on the key
fob within 10 seconds.
NOTE:
Your key fob can be unlinked from your memory
settings by pushing the set (S) button, followed by
pushing the unlock button on the key fob within
10 seconds.
R
HE
EMOTE
M
EMORY
T
M
O
EMORY
NOTE:
The vehicle must be in PARK to recall memory posi-
tions. If a recall is attempted when the vehicle is
not in PARK, a message will display in the
instrument cluster display.
P
R
OSITION
ECALL
To recall the memory settings for driver one or two,
push the desired memory button number (1 or 2)
or the unlock button on the key fob linked to the
desired memory position.
A recall can be canceled by pushing any of the
memory buttons (S, 1, or 2) during a recall. When
a recall is canceled, the driver seat will stop
moving. A delay of one second will occur before
another recall can be selected.
SEATS
Seats are a part of the Occupant Restraint system
of the vehicle.
WARNING!
It is dangerous to ride in a cargo area, inside
or outside of a vehicle. In a collision, people
riding in these areas are more likely to be seri-
ously injured or killed.
Do not allow people to ride in any area of your
vehicle that is not equipped with seats and
seat belts. In a collision, people riding in these
areas are more likely to be seriously injured or
killed.
Be sure everyone in your vehicle is in a seat
and using a seat belt properly.
Advertisement
Table of Contents
