Driver Memory Settings - If Equipped; Programming The Memory Feature - Jeep GRAND CHEROKEE 2023 Owner's Manual

34 GETTING TO KNOW YOUR VEHICLE
DRIVER MEMORY SETTINGS — IF EQUIPPED
This feature allows the driver to save up to two different
memory profiles for easy recall through a memory switch.
Each memory profile saves desired position settings for
the following features:
 Seat position
 Easy Entry/Exit seat (if equipped)
 Side mirrors
 Power tilt and telescopic steering column (if equipped)
 A set of desired radio station presets
The memory settings switches are located on the front
door panels, next to the door handle, and consists of
three buttons:
 The set (S) button, which is used to activate the
memory save function.
 The (1) and (2) buttons which are used to recall either
of two saved memory profiles.
Memory Setting Buttons
NOTE:
Your vehicle is equipped with two key fobs, each can be
linked to either driver's side memory position 1 or 2.
P T M
ROGRAMMING HE EMORY
To create a new memory profile, perform the following:
NOTE:
Saving a new memory profile will erase the selected profile
from memory.
1. Place the vehicle's ignition in the ON/RUN position
(do not start the engine).
2. Adjust all memory profile settings to desired
preferences (i.e., seat, side mirror, power tilt/
telescopic steering column [if equipped], and radio
station presets).
3. Push and release the set (S) button on the memory
switch.
4. Within five seconds, push and release either of the
memory buttons (1) or (2). The instrument cluster
display will indicate which memory position has
been set.
NOTE:
Memory profiles can be set without the vehicle in PARK,
but the vehicle must be below 5 mph (8 km/h) to recall a
memory profile.
F
EATURE