Table of Contents
Advertisement
296
SERVICING AND MAINTENANCE
3. Replace the bulbs by pulling straight out of
bulb housing.
Front Courtesy Bulb Housing
4. Insert the new bulbs, making sure that they are
properly locked.
5. Reassemble the bulb housing and courtesy
light housing making sure that they are
properly locked.
6. Install the front courtesy light, making sure
that it is properly locked.
Dome Light Vanity Mirror — If Equipped
To replace the bulbs proceed as follows:
1. Lift the cover of the mirror and pull out the
mirror frame with the mirror light cover
attached.
2. Replace the bulb, releasing it from the side
contacts, and then insert the new bulb, making
sure that it is properly locked between the
contacts.
Visor
1 — Visor Mirror Cover
2 — Visor Mirror Light
3. Reinstall the visor mirror light cover making
sure that it is properly locked.
4. Finally lower the visor mirror cover to the
mirror.
Dome Light Glove Compartment
To replace the bulb proceed as follows:
1. Open the glove compartment.
2. Place your fingers inside the light assembly,
pull the bulb to replace it.
Bulb Removal/Installation
3. Insert the new bulb, making sure it is properly
locked.
Advertisement
Table of Contents
