Parallel/Perpendicular Parking Space Assistance Operation - Jeep Compass 2022 Owner's Manual

Driver's door is opened.

Rear liftgate is opened.

Electronic Stability Control/Anti-lock Braking

System intervention.
The ParkSense Active Park Assist system will allow
a maximum number of shifts between DRIVE and
REVERSE. If the maneuver cannot be completed
within the maximum amount of shifts, the system
will cancel and the instrument cluster display will
instruct the driver to complete the maneuver
manually.
The ParkSense Active Park Assist system will only
operate and search for a parking space when the
following conditions are present:
Gear selector is in DRIVE.

Ignition is in the RUN position.

ParkSense Active Park Assist switch is acti-

vated.
Driver's door is closed.

Rear liftgate is closed.

The outer surface and the underside of the front

and rear fascias/bumpers are clean and clear
of snow, ice, mud, dirt or other obstruction.
Vehicle speed is less than 15 mph (25 km/h).

NOTE:
If the vehicle is driven above approximately
15 mph (25 km/h), the instrument cluster display
will instruct the driver to slow down. If the vehicle
is driven above approximately 18 mph (30 km/h),
the system will cancel. The driver must then reac-
tivate the system by pushing the ParkSense Active
Park Assist switch.
When pushed, the LED on the ParkSense Active
Park Assist switch will blink momentarily, and then
the LED will turn off if any of the above conditions
are not present.
P /P
ARALLEL ERPENDICULAR
S A O
PACE SSISTANCE PERATION
When the ParkSense Active Park Assist system
is enabled, the "Active ParkSense Searching -
Press or to Switch Maneuver" message will
appear in the instrument cluster display. You may
select perpendicular, parallel, or parallel park exit.
The arrow buttons on the left side of the steering
wheel can be used to switch parking maneuvers.
STARTING AND OPERATING
Active ParkSense Searching
NOTE:
P
ARKING
When searching for a parking space, use the

turn signal indicator to select which side of the
vehicle you want to perform the parking
maneuver. The ParkSense Active Park Assist
system will automatically search for a parking
space on the passenger's side of the vehicle if
the turn signal is not activated.
The driver needs to make sure that the selected

parking space for the maneuver remains free
and clear of any obstructions (e.g. pedestrians,
bicycles, etc.).
The driver is responsible to ensure that the

selected parking space is suitable for the
maneuver and free/clear of anything that may
141
4