Parksense Active Park Assist System; If Equipped; Enabling And Disabling The Parksense Active Park Assist System - Jeep Compass 2022 Owner's Manual

140 STARTING AND OPERATING
CAUTION!
ParkSense is only a parking aid and it is

unable to recognize every obstacle, including
small obstacles. Parking curbs might be
temporarily detected or not detected at all.
Obstacles located above or below the sensors
will not be detected when they are in close
proximity.
The vehicle must be driven slowly when using

ParkSense in order to be able to stop in time
when an obstacle is detected. It is recom-
mended that the driver looks over his/her
shoulder when using ParkSense.
PARKSENSE ACTIVE PARK ASSIST SYSTEM —

IF EQUIPPED

The ParkSense Active Park Assist system is
intended to assist the driver during parallel,
perpendicular, and parallel park exit maneuvers by
identifying a proper parking space, providing
audible/visual instructions, and controlling the
steering wheel. The ParkSense Active Park Assist
system is defined as "semi-automatic" since the
driver maintains control of the accelerator, gear
selector and brakes. Depending on the driver's
parking maneuver selection, the ParkSense Active
Park Assist system is capable of maneuvering a
vehicle into a parallel or a perpendicular parking
space on either side (i.e., driver side or passenger
side), as well as exiting a parallel parking space.
NOTE:
The driver is always responsible for controlling

the vehicle, responsible for any surrounding
objects, and must intervene as required.
The system is designed to assist the driver and

not to substitute the driver.
During a semi-automatic maneuver, if the driver

touches the steering wheel after being
instructed to remove their hands from the
steering wheel, the system will cancel, and the
driver will be required to manually complete the
parking maneuver.
The system may not work in all conditions

(e.g. environmental conditions such as heavy
rain, snow, etc., or if searching for a parking
space that has surfaces that will absorb the
ultrasonic sensor waves).
New vehicles from the dealer must have at least

30 miles (48 km) accumulated before the Park-
Sense Active Park Assist system is fully cali-
brated and performs accurately. This is due to
the system's dynamic vehicle calibration to
improve the performance of the feature.
E A D
NABLING ND ISABLING
P S A P
ARK ENSE CTIVE ARK
S
YSTEM
The ParkSense Active Park Assist system
can be enabled and disabled with the
ParkSense Active Park Assist switch,
located on the switch panel below the
Uconnect display.
To enable or disable the ParkSense Active Park
Assist system, push the ParkSense Active Park
Assist switch once (LED turns on). Pushing the
switch a second time will disable the system
(LED turns off).
The ParkSense Active Park Assist system will turn
off automatically for any of the following
conditions:
Parking maneuver is complete.

Vehicle speed is greater than 18 mph

(30 km/h) when searching for a parking space.
Vehicle speed is greater than 5 mph (7 km/h)

during active steering guidance into the parking
space.
Steering Wheel is touched during active

steering guidance into the parking space.
ParkSense Park Assist switch is pushed.

T
HE
A
SSIST