Power Door Locks; Keyless Enter 'N Go™ - Passive Entry - Jeep Compass 2022 Owner's Manual

Hide thumbs Also See for Compass 2022:
Table of Contents

Advertisement

NOTE:
Manually locking the vehicle will not arm the
Vehicle Security system.
The manual door locks will not lock or unlock the
liftgate.
WARNING!
For personal security and safety in the event
of a collision, lock the vehicle doors before you
drive as well as when you park and exit the
vehicle.
When exiting the vehicle, always remove the
key fob from the vehicle and lock your vehicle.
If equipped with a Keyless Enter 'n Go™ Igni-
tion, always make sure the keyless ignition is
in the OFF position, remove the key fob from
the vehicle and lock the vehicle. Unsupervised
use of vehicle equipment may cause severe
personal injuries or death.
Never leave children alone in a vehicle, or
with access to an unlocked vehicle. Allowing
children to be in a vehicle unattended is
dangerous for a number of reasons. A child or
others could be seriously or fatally injured.
Children should be warned not to touch the
parking brake, brake pedal or the gear
selector.
Do not leave the key fob in or near the vehicle,
or in a location accessible to children. Do not
leave the Keyless Enter 'n Go™ Ignition in the
ON/RUN position. A child could operate power
windows, other controls, or move the vehicle.
P
D
OWER
OOR
The power door lock switches are located on each
front door panel. Push the switch to lock or unlock
the doors and liftgate.
Power Door Lock Switch
(Continued)
WARNING!
L
OCKS
GETTING TO KNOW YOUR VEHICLE
If you push the power door lock switch while the
ignition is in the ON/RUN position, and any door or
the liftgate is open, the power locks will not
operate. This prevents you from accidentally
locking the key fob in the vehicle. Placing the
ignition in the OFF position or closing the doors and
liftgate will allow the locks to operate.
K
E
'
G
™ — P
EYLESS
NTER
N
O
E
NTRY
The Passive Entry system is an enhancement to
the vehicle's Remote Keyless Entry system and a
feature of Keyless Enter 'n Go™ — Passive Entry.
This feature allows you to lock and unlock the
vehicle's door(s) without having to push the key fob
lock or unlock buttons.
NOTE:
Passive Entry may be programmed on/off
through Uconnect Settings Ú page 165.
The key fob may not detect the Passive Entry
system if it is located next to a mobile phone,
laptop or other electronic device; these devices
may block the key fob's wireless signal and
prevent the Passive Entry system from locking
and unlocking the vehicle.
23
2
ASSIVE

Advertisement

Table of Contents
loading

Table of Contents