Installation And Use - Agilent Technologies PHD-4 User Manual

Portable helium detector
Hide thumbs Also See for PHD-4:
Table of Contents

Advertisement

Installation and Use

WARNING!
The device is furnished with a battery charger with three-wire power cord
with internationally-approved plug. Always use this power cord and insert
the plug in an outlet with a suitable protective earthed conductor in order to
avoid electrical discharge. High voltages that may cause serious injury or
death are generated inside the device.
WARNING!
Do not use the PHD-4 in environments containing potentially flammable gases
or vapors. If the PHD-4 is used in combination with sampling safety devices
(only if marked EEX ia IIAT4), the PHD-4 must be positioned outside the area
with a risk of explosion.
WARNING!
The PHD-4 is complete with a rechargeable battery and related battery
charger. Recharge the battery in a safe area far from explosive gases or
highly flammable materials. Recharging or use of the device in unsafe areas
may cause serious injury and damage.
While the PHD-4 battery pack charging process is running (power supply
WARNING!
connected) DO NOT carry the unit.
PHD-4 Portable Helium Detector User Manual
Installation procedure

Installation and Use

/
87-900-120-01 ( F)
4
61/140

Advertisement

Table of Contents
loading

This manual is also suitable for:

969-4600969-4640

Table of Contents