4
Slide out the four-pin electrical connector of the battery exerting
a slight pressure on the lever of disconnection B of the connector.
5
Remove the battery pack from its housing.
6
Position the fully charged battery pack in the housing provided.
7
Connect the four-pin electrical cable of the new battery pack to
battery connector.
8
Reposition the edges of the strips of Velcro ® so as to secure the
battery pack in its housing.
PHD-4 Portable Helium Detector User Manual
Technical Information
Routine Maintenance of the PHD-4
/
87-900-120-01 (F )
5
87/140