Table of Contents
Advertisement
9 SERVICE
8.
Perform one of the following:
•
Footplates With Spring Buttons (Detail "A"):
i.
Ensure that the release buttons fully protrude from holes on both sides of the upper footrest support.
•
Bolt-In-Place Footplates (Detail "B"):
i.
From the outside of the swingaway front rigging, insert the threaded rivet through both the front rigging support and the footplate
assembly.
ii.
From the inside of the swingaway front rigging, insert the button head screw through the appropriate adjustment hole and thread into
the threaded rivet.
iii.
Using a screwdriver to hold the threaded rivet in position, securely tighten the button head screw. Torque to 32 in-lbs.
9.
Rotate cam lock lever down to locked position.
DETAIL "A"
Footplates with Spring
Buttons
Front Rigging
Support
Release Button
Adjustment
Holes
Cam Lock
Lever
Invacare® Tracer® SX5 Wheelchair
Bolt-in-Place Footplates
Threaded
Rivet
Footplate
Assembly
Inside of
Swingaway
Front Rigging
Footplate
Assembly
FIGURE 1 Replacing Heel Loop
DETAIL "B"
Front Rigging
Front Rigging Support
Support
Button Head
Screw
Cam Lock
Lever
Adjustment Hole
Outside of Swingaway
Front Rigging
64
Mounting Screw
Threaded
Rivet
Footplate Assembly
Locknut
Spacer
Cam Lock
Lever
Heel
Loop
Slide
Tube
Footplate
Part No. 1110550
Advertisement
Table of Contents
