Cable Diagnostics - Planet Networking & Communication IGS-6329 Series User Manual

L3 industrial managed ethernet switch
Table of Contents

Advertisement

4.10.13 Cable Diagnostics

This page is used for running the Cable Diagnostics.
Press to run the diagnostics. This will take approximately 5 seconds. If all ports are selected, this can take approximately 15
seconds. When completed, the page refreshes automatically, and you can view the cable diagnostics results in the cable status
table. Note that Cable Diagnostics is only accurate for cables of length 7 - 140 meters.
10 and 100 Mbps ports will be linked down while running cable diagnostic. Therefore, running cable diagnostic on a 10 or 100
Mbps management port will cause the switch to stop responding until VeriPHY is complete. The VeriPHY Cable Diagnostics
screen in
Figure 4-10-13
appears.
Figure 4-10-13 VeriPHY Cable Diagnostics Page Screenshot
409

Advertisement

Table of Contents
loading

This manual is also suitable for:

Igs-6329-8up2s2xIgs-6329-8up2s4x

Table of Contents